Configuration Software User Manual
Note:
If you have not do the installation of the USB driver, the device will cannot be connected to
your computer.
3. G606 user interface overview
Once “G606” is started, and connect to the computer correctly, the tool will start up as
shown in Figure 1.
—Figure 1—
3.1
The tool is composed of these tabs:
1.
“Device”→”So”Hardware”
2.
“Server”→”Main”+”SMS ”TCP/UDP Upload”
3.
“User”→”Main”+”SMS Forwarding & Shutcut Key”+”Monitor & Communication”
4.
“Dynamic Upload”