GMC-I Gossen-Metrawatt GmbH
13
GB
1)
Reactivation when actual value falls below prescribed limit value
2)
Relative to alternating voltage values
3)
Also applies to continuity testing
4)
When a measurement value is stored for the first time as a reference value,
the acoustic signal sounds twice. For subsequent storage of the same mea-
surement value, the acoustic signal sounds only twice if the subsequently
stored measurement value deviates from the first value by less than 0.33%
of the measuring range dependent upon resolution.
5)
Exception: 10% at 300
Ω
or 3 nF
Abbreviations
MR = Measuring range
As long as the DATA function is active, the measuring
ranges should not be changed manually.
The DATA function is deactivated if the
DATA|CLEAR
key is
pressed and held (approx. 1 s), if the rotary switch is acti-
vated or if the instrument is switched off and back on
again.
Function
DATA
⇓
DATA
Condition
Response at Instrument
Measuring
Function
Measurement
Value
Sub-Display
Acoustic
Signal
Meas.
Value
DATA
Switch on
brief
is
dis-
played
brief
Store
(stabilized mea-
surement value)
V, dB
2)
, A
F, Hz
> 3.3%
5)
of MR
is
dis-
played
brief
2x
4)
Ω
3)
,
3)
OL
5)
Reactivate
1)
V, dB
2)
, A
F, Hz
< 3.3%
5)
of MR
stored
meas.
value
blinks
Ω
3),
3)
OL
5)
Switch to
function
MIN/MAX
brief
see Table chapter 6
Quit
long
is
deleted
is
deleted
2x
