7 GMC-I Messtechnik GmbH
3.
General Safety Precautions
Warning:
The SMARTCONTROL may only be installed by trained, authorized personnel. In particular, all
VDE and EVU regulations, as well as other connection regulations and stipulations, must be
complied with.
Electrostatic charging must be avoided. For this reason, avoid touching the PCB and provide for
electrostatic discharging or personnel and tools before beginning work.
Do not install during a thunderstorm.
Make sure that all sources of electrical power have been disconnected before conducting work
on the system’s electrical section.
Note:
The SMARTCONTROL is not approved for use as a life support device in safety relevant systems or
other vitally important equipment.
Examples: fire alarms, reactor monitoring, medical devices, aircraft
It is the responsibility of the user to install suitable safety and protective devices in all areas of
application.