16
Tube Removal
For cleaning and repairing purposes, the tube can be
removed from the rest of the device with the following
procedures:
1. Orient Sport into Vertical Position (see “Turn Vertical”).
2. Locate tube release set screws on the under side of the top
bracket.
3. Using a screwdriver, loosen set screws no more than three
rotations counterclockwise.
4. Firmly grasping tube in one hand and bracket in the other, slide
tube out of the bracket by pushing the tube toward the closed
end. Be careful not to force the tube or knock it on hard surfaces.
5. Repeat these steps in reverse order to put tube back in place.
Don’t forget to tighten the set screws.
To mount onto a tripod:
1. Only use a tripod capable of handling the weight and torque of
the GoSun Sport loaded with food.
2. Locate the tripod mount on the underside of the top bracket by
rotating bracket to the vertical mode (see “Turn Vertical”).
3. Connect tripod into the 1/4 20 female threaded slot.
4. Be sure to tighten securely.
5. Use the tripod’s head to adjust the tilt angle.