Device description
13
Noise level
The noise level generated by the device is significantly below 70 dB(A).
Vibrations
The magnet is to be protected against strong external vibrations, because the magnet might
lose
magnetic force permanently
and or the brittle ceramic magnet material might break.
The only vibrations caused by the SECR are caused by the moving and rotating magnet bars. The
product channel in which the device is mounted has to be stiff enough to damp out the (relatively small)
forces of the moving and rotating magnet bars.
Cleaning
Minimum 2x per day
cleaning (Fe parts disposal) of the device is advised for an optimal magnetic
separation and to prevent Fe accumulation on the magnet bar tubes and the problems that can be
caused by that. Clean more often when the magnets catch a lot of Fe parts and less often if proven that
2x per day is too much. Clean magnets have the best separation result, so make sure to clean more
often than assumed necessary, to achieve a satisfactory result of the magnetic device.
Deliverable specials
High product temperatures
For high product temperatures there is the possibility of using other magnet material than the standard
Neoflux
®
magnets. See product specs in the appendices.
Abrasive products
If you have an abrasive product, we can supply the magnet bars and /or inside housing with a protective
coating, like for instance a tungsten carbide coating.
Use in FOOD product flows
The cleanflow magnet can be adapted so that it can be used in almost any food stream. It’s standard
execution already has few gaps in the product channel. The product channel (or even complete housing
+ magnet bars) can be delivered in gap-free SS AISI304 or AISI316, or in combination with other – for
instance prescribed or delivered by customer – food appproved materials. Surface treatments like
electrolytic polishing, staining, etc, are also possible.
