background image

Table of Contents

1  Introduction and Safety..............................................................................................................3

1.1  Introduction.......................................................................................................................... 3
1.2  Safety..................................................................................................................................... 3

1.2.1  Safety terminology and symbols.................................................................................3
1.2.2  Safety instruction decals.............................................................................................. 4
1.2.3  User safety......................................................................................................................5
1.2.4  Protecting the environment.........................................................................................6

2  Transportation and Storage...................................................................................................... 7

2.1  Examine the delivery........................................................................................................... 7

2.1.1  Examine the package................................................................................................... 7
2.1.2  Examine the unit............................................................................................................7

2.2  Pump lifting...........................................................................................................................7
2.3  Long-term storage............................................................................................................... 8

3  Product Description....................................................................................................................9

3.1  General description............................................................................................................. 9
3.2  Operational specifications.................................................................................................. 9

4  Installation................................................................................................................................. 11

4.1  Preinstallation.....................................................................................................................11

4.1.1  Pump mounting guidelines.......................................................................................11
4.1.2  Pump location guidelines..........................................................................................11
4.1.3  Piping checklist........................................................................................................... 12

4.2  Typical pump installation..................................................................................................12

5  Commissioning, Startup, Operation, and Shutdown.......................................................... 16

5.1  Preparation for startup...................................................................................................... 16

5.1.1  Check the rotation...................................................................................................... 16

5.2  Prime the pump................................................................................................................. 17
5.3  Start the pump....................................................................................................................17
5.4  Pump operation precautions............................................................................................17
5.5  Shut down the pump.........................................................................................................18
5.6  Note on the packed pump operation............................................................................. 18
5.7  Vibration..............................................................................................................................19

6  Maintenance..............................................................................................................................20

6.1  Lubrication..........................................................................................................................20
6.2  Disassembly........................................................................................................................20

6.2.1  Disassembly precautions........................................................................................... 20
6.2.2  Drain the pump...........................................................................................................20
6.2.3  Remove the pump assembly.....................................................................................20
6.2.4  Remove the impeller.................................................................................................. 21
6.2.5  Remove the mechanical seal (e-1500–F)................................................................. 21
6.2.6  Remove the seal or packing rings (e-1500-S, e-1500-D, e-1500-PF)................... 21
6.2.7  Remove the box type single mechanical seal (e-1500-S)...................................... 21
6.2.8  Impeller trimming guidelines....................................................................................21

6.3  Pre-assembly inspections................................................................................................. 22

6.3.1  Replacement guidelines............................................................................................ 22
6.3.2  Shaft inspection...........................................................................................................23

Table of Contents

Series e-1500 INSTRUCTION MANUAL

1

Summary of Contents for e-1500 Series

































Reviews: