24
EN -
To remove the blade
29
, proceed as follows:
1. Position the mixing bowl
5
horizontally.
2. Press the unlocking lever
6
on the bottom of the mixing bowl
5
so that it points to
the open lock symbol .
3. Pull out the blade by holding the center
29
carefully towards the top.
To insert the blade
29
, proceed as follows:
1. Position the mixing bowl
5
horizontally.
2. Insert the blade
29
from the top.
3. Make sure that the bottom part of the blade
29
is pushed through the recess in the
underside of the mixing bowl
5
and is firmly locked into place.
WARNING!
•
Ensure that the seal
28
for the blade
29
is positioned correctly, otherwise the
content may escape.
4. To lock the blade
29
, move the unlocking lever
6
on the bottom of the mixing bowl
5
so that it points to the closed lock symbol .
NOTE:
Chop large pieces into 3 to 4 cm (1.1 to 1.5 inches) cubes to avoid larger
pieces getting stuck in the blades.
9.4 Inserting the mixing bowl
1. Place the mixing bowl
5
into the mixing bowl socket
11
.
2. Press the mixing bowl
5
downwards gently until the flower-shaped hub of the blade
29
engages with the blade socket
12
. You may need to wobble the mixing bowl
5
slightly so that it fits correctly.
NOTES:
Should the mixing bowl
5
not be positioned correctly, a safety mechanism
prevents the functioning of the appliance.