38
EN -
Problem
Cause
Solution
Liquid
underneath
the appliance.
The blade
29
has not been
inserted correctly so that the
mixing bowl
5
leaks.
Insert blade
29
correctly
(see “Using and removing
the blade” on page 23).
Seal
28
for the blade is
defective.
Insert new blade seal
28
(see “Cleaning, checking
and replacing seals” on
page 34).
Liquid spilled out from the
mixing bowl
5
flowing onto
the surface through the
overflow hole
14
of the main
unit
15
. (See “Overflow”
on page 22.)
When mixing liquids at
speed
10
or on turbo, the
mixing bowl
5
must not
contain more than 33.8 oz
/ 1 L, otherwise liquid may
spill out. For speed settings
of less than 10, the mixing
bowl
5
may be filled up to
a maximum of 2.2 L / 2.3 QT.
Liquid escapes
through the mixing
bowl lid
34
on the
mixing bowl
5
.
Seal
33
has not been inserted
correctly.
Insert seal
33
correctly (see
“Cleaning, checking and
replacing seals” on page
34).
Seal
33
is defective.
Insert new seal
33
(see
“Cleaning, checking and
replacing seals” on page
34).
No temperature can
be set.
User is not in a custom mode
and is using a preset mode.
Press the
MODE
button
23
until the appliance
returns to custom mode.
Parts of the appliance
are discolored.
Certain food or spices (e.g.,
curry) may discolor plastic.
This is not a defect with the
appliance.
Wash thoroughly although
discoloring in plastic might
be unavoidable.
A speed setting
exceeding 3 cannot
be selected.
A temperature has been set. Set temperature to 0.
The appliance stops
after 15 minutes.
A speed setting 7 - 10 was
selected. At these speed
settings, the appliance will
function for a maximum of 15
minutes without a pause.
Select speed setting 0 - 6
(see “Setting the speed”
on page 20).
When switching
on, the set time is
automatically set to
15:00.
