17
❐
Dilute the juice for children with water and if necessary, for yourself as well. This applies
particularly to lemon juice, dark red juices (e. g. from red beets) and dark green juices (e. g.
from broccoli, spinach) as they are very strong.
❐
Carrots may stain the plastic on the device. This is normal and no cause for concern, and
does not fall under the product‘s warranty. You can soak a cloth in cooking oil and try to
remove the stain to some extent.
Which fruits or vegetables are suitable for juicing?
• You can use nearly all types of fruits and vegetables with your new juicer. Types that contain
little water such as bananas or avocados are, however, not suitable for the juicer.
• We recommend that you use ripe fruits as they provide the most juice and the aroma is the
most intense. Ensure, however, that the fruits are not too ripe or even spoiled.
• Ideally, use fruits or vegetables of the season.
How do I prepare the fruits or vegetables for juicing?
• First of all, you should thoroughly wash all fruits before juicing them and then dab them until
dry to prevent them from being diluted. Wash vegetables thoroughly and if necessary, brush
them off under running water.
• In general, you should peel all types of fruits and vegetables with a hard skin e. g. melon,
mango, and citrus fruits before juicing.
• Cut the fruits or vegetables into small pieces if necessary so that they easily fit the fill chute.
• You must first remove any pits from stone fruits e. g. cherries, plums, peaches before juicing.
• Fruits and vegetables with a thin skin such as apples, pears, and carrots do not have to be
peeled. We recommend that you do not remove the skin of such fruits or vegetables as they
contain valuable vitamins.
• Leafy vegetables can be best processed if they have been firmly rolled together in advance.
Assembling the Juicer
❐
Attention! Before assembly ensure that the mains cord is not
connected to a socket and that the On/Off switch is set to 0.
1.
Place the motor casing on a dry, level, moisture resistant, and anti-slip surface. Press it slightly
down and the suction feet will adhere.
2.
Move the retaining bracket to the spout side.
3.
Place the juice collecting container on the motor casing and press it down.
4.
Place the cutting sieve on the driving disc in the centre of the juice collecting container and
press it down. It must audibly and noticeably lock into place.
In the process, hold it
firmly by the edge, do not touch the blades!
02088+02089_DE-GB-FR-NL_V0.indd 17
18.11.09 14:46
