EN
20
■
Never place the device on a soft surface, do not insert anything into the ventilation
openings of the device and make sure that these do not become clogged. The device
could otherwise overheat and be damaged.
■
Make sure that foodstu
ff
s containing oil and fats are not overheated.
■
Do not cover the device during operation in order to prevent it from overheating.
■
In the event of a
fi
re: Do not extinguish with water! Smother the
fl
ames with a
fi
reproof
blanket or a suitable
fi
re extinguisher.
NOTICE – Risk of Damage to Material and Property
■
Do not place any metal foil packaging or tools in the device.
■
The device must be switched o
ff
when inserting or removing the mains plug.
■
Never pull or carry the device by the connecting cable. When you pull it out of the plug
socket, always pull on the mains plug and never the mains cable!
■
Never lay or place heavy objects on the device or the connecting cable.
■
Pull the mains plug out of the plug socket if an error occurs during operation, when
there is a power cut or before a thunderstorm.
■
Protect the device from other heat sources, naked
fl
ames, sub-zero temperatures,
persistent moisture, wet conditions and impacts.
■
Use only original accessories from the manufacturer in order to guarantee that there is
no interference that may prevent the device from working and to avoid possible damage.
Safety Features
• The device is equipped with an internal timer. Once the set timer time has elapsed,
the supply of heat is automatically switched o
ff
. To switch the device on again, touch
the
fi
eld
(
22
)
(see the “Operation” chapter – “Operating Elements and Functions”
and the “Using the Device and Preparing Food” chapter).
• The device automatically stops the supply of heat when the drawer (
9
) is pulled out of
the device while preparing food. The control lamp for the active programme goes out
and the display (
16
) shows “– – –”. If the drawer is inserted back into the device, the
control lamp for the previously selected programme lights up and the set temperature
and the remaining timer time appear on the display. The set programme continues to
run until the timer time has elapsed or the device is switched o
ff
manually (see the
“Operation” and “Using the Device and Preparing Food” chapters).
• The device has overheating protection. It switches o
ff
if it is overloaded. In this
case, pull the mains plug out of the plug socket and allow the device to cool down
completely. It is then ready to be used again.
Before Initial Use
• Remove
any
possible
fi
lms, stickers or transport protection from the device.
Never
remove the rating plate and any possible warnings!
• The device should be used for the
fi
rst time without any food in it as it may produce
some smoke or odours due to coating residues. Allow the device to heat up on the
highest temperature setting for approx. 15 minutes without any food in it (see the
“Operation“ and “Using the Device and Preparing Food” chapters).
• Thoroughly clean the device and all accessories (see the “Cleaning and Storage”
chapter).
02850_Inlay_DE-EN-FR-NL_A5_V3.indb 20
02850_Inlay_DE-EN-FR-NL_A5_V3.indb 20
22.07.2020 14:47:27
22.07.2020 14:47:27
