EN
24
Cleaning and Storage
PLEASE NOTE!
■
Do not spray cleaning agents directly onto the device.
■
Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to
clean the device. These may damage the surface.
Clean the device and the used accessories immediately after each use to prevent germ
formation. Do not allow any food residues to dry on.
1. Pull the drawer (
9
) out of the device.
2. If you have not already done so, empty the drawer.
3. Remove the rack (
7
) from the drawer.
4. Clean the drawer and the rack with warm water and mild detergent. In the case of
stubborn dirt, we recommend soaking the drawer and the rack in warm water and
detergent beforehand.
5. Clean the housing (
3
), the drawer compartment (
5
) and the heating element if neces-
sary with a damp cloth and mild detergent.
6. Allow all parts to dry completely before the device is stored away in a dry, clean place
that is out of the reach of children and animals.
Troubleshooting
If the device does not work properly,
fi
rst check whether you are able to rectify the prob-
lem yourself. If the problem cannot be solved with the steps listed, contact the customer
service department.
Do not attempt to repair an electrical device yourself!
Problem
Possible cause
Fix
The device does not
work. / Nothing is
shown on the display
(
16
).
The mains plug is not in-
serted correctly in the plug
socket.
Correct the
fi
t of the mains
plug.
The plug socket is defective.
Try another plug socket.
There is no mains voltage.
Check the fuse of the mains
connection.
The
fi
eld
(
22
) has not
been pressed.
Switch on the device using
the
fi
eld
.
The fuse in the fuse
box is triggered.
Too many devices connected
to the same circuit.
Reduce the number of devices
in the circuit.
The drawer (
9
) with
the rack (
7
) cannot
be inserted into the
device.
The drawer is over
fi
lled.
Fill the drawer no more than
2/3 full with food.
02850_Inlay_DE-EN-FR-NL_A5_V3.indb 24
02850_Inlay_DE-EN-FR-NL_A5_V3.indb 24
22.07.2020 14:47:28
22.07.2020 14:47:28
