EN
22
NOTICE – Risk of Damage to Material and Property
■
Only connect the device to a plug socket that is properly installed and matches the
technical data of the device. The plug socket must also be readily accessible after
connection so that the connection to the mains can quickly be isolated.
■
Unwind the connecting cable fully before connecting up the device.
■
Make sure that the connecting cable is not squashed, bent or laid over sharp edges
and does not come into contact with hot surfaces (e.g. of the device).
■
Do not wrap the mains cable around the device (danger of the cable breaking).
■
Do not place any metal foil packaging or tools in the device.
■
The device must be switched off when inserting or removing the mains plug.
■
Never pull or carry the device by the mains cable. When you pull it out of the socket,
always pull on the mains plug and never the mains cable!
■
Do not place or lay any heavy objects on the device or the connecting cable.
■
Remove the mains plug from the socket if a fault occurs during operation, in the event
of a power outage or before a thunderstorm.
■
Protect the device from other heat sources, naked fl ames, sub-zero temperatures,
persistent moisture, wet conditions and impacts.
■
Use only original accessories from the manufacturer in order to guarantee that there
is no interference that may prevent the device from working and to avoid possible
damage.
Items Supplied
• Hot-air fryer
• Drawer
• Rack
• Operating instructions
Check the items supplied for completeness and transport damage. If you fi nd any dam-
age to the device or the connecting cable, do not use the device but contact our customer
service department.
