23
EN
Device Overview
1
2
4
5
6
7
3
1
Device housing
2
Temperature control lamp
3
Operating lamp
4
Drawer compartment
5
Rack
6
Handle
7
Drawer
8
Temperature control dial
(80°C – 200°C)
9
Timer (0 – 60 minutes)
Not shown:
• Ventilation slots on the back of the
device
9
8
Before Initial Use
• Remove all packaging materials and any possible protective fi lms used for protection
during transportation.
Never remove the rating plate and any possible warnings!
• Before you fi rst enjoy any fried food, we recommend that you carry out a trial run to
remove any possible production residues. To do this, allow the device to heat up on
the highest temperature setting for approx. 15 minutes without any food in it (see the
"Use” chapter). Make sure that the room is well ventilated as you do this!
When the device is fi rst used, production-related additives (e.g. grease) may
cause a small amount of smoke and / or an odour to be produced. This is normal
and not a device defect.
• Clean the device and all accessories thoroughly (see the “Cleaning, Care and Stor-
age” chapter).
