15
EN
■
Do not place food that is wrapped in cling
fi
lm or plastic bags in or on the device.
■
Always check the device for damage before putting it into operation. Only use it if the
device, mains cable and mains plug have no signs of damage!
Avoiding Damage to Material, Property and the Device
■
Always place the device on a dry,
fl
at and
fi
rm surface that is not sensitive to heat.
■
Do not use the device for longer than 30 minutes without stopping. The device could
overheat and be damaged. Switch it off and allow it to cool down completely.
■
Maintain suf
fi
cient clearance from other sources of heat such as hotplates or stoves,
and from gas sources, in order to avoid damage to the device.
■
Do not expose the device to extreme temperatures, strong temperature
fl
uctuations,
direct sunlight or moisture.
■
Before putting the device into operation, check whether the device is clean and dry
and has been correctly assembled.
■
The device must not be moved during operation.
■
Do not drop the device or allow it to be knocked violently.
■
Do not pull or carry the device by the mains cable.
■
Make sure that the mains cable is not squashed, bent or laid over sharp edges and
does not come into contact with hot surfaces.
■
Only the accessory parts supplied by the manufacturer should be used. If accessory
parts which are not authorised by the manufacturer are used, all warranty and
guarantee claims are void.
■
Do not use any caustic or abrasive cleaning agents to clean the device. These can
damage the surface.
Notes on Hygiene
■
The device should be cleaned before you use it for the
fi
rst time. It is possible that
production residues may still be adhering to the surfaces. It is essential that you
follow the cleaning instructions in the "Before Initial Use" chapter.
■
Clean the device after each use to prevent germ formation (see the "Cleaning and
Storage" chapter).
■
Keep the device clean.
07329_DE-EN-FR-NL_A5_V1.indb 15
07329_DE-EN-FR-NL_A5_V1.indb 15
25.05.2016 15:33:11
25.05.2016 15:33:11
