EN
16
Items Supplied and Device Overview
1
Locking ring
2
Protective edge
3
Sugar container
4
Mains cable
5
Suction feet
6
Base
7
On/Off switch
8
Heat pipes
9
Bowl
Not shown:
• Measuring
spoon
• Wooden skewers (10 x)
Before Initial Use
ATTENTION!
■
Danger of suffocation from plastic
fi
lm and bags! Keep children and animals away
from the packaging material.
■
Please note
: You may notice a strange smell the
fi
rst time you use the device.
We therefore recommend that you initially operate the device for a few minutes
WITHOUT any contents in order to burn off any production residues that may remain.
During this time, make sure the room is well ventilated, e.g. with wide-open windows!
■
There may still be some production residues on the device. To avoid harmful effects
to your health, thoroughly clean the device before you use it for the
fi
rst time.
1. Unpack the items supplied and check them for completeness (see the “Items Supplied
and Device Overview” chapter) and transport damage. If the device, mains plug or
mains cable does have damage, do not use the device(!), but contact our customer
service department.
2. Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.
3. Clean the device and the accessories (see the “Cleaning and Storage” chapter).
Then dry the device and accessories well.
4. Assemble the device (see the “Assembly” section).
5. Place the device on a dry, heat-resistant,
fl
at surface with suf
fi
cient clearance on all
sides and above (around 30 cm).
6. Connect the device to a mains socket that has been properly installed. Make sure
that the mains cable does not present a trip hazard.
7. Switch the device on by moving the On/Off switch (
7
) to Position
I
(On). Allow the
device to heat up for around 5 minutes to remove any production residues.
07329_DE-EN-FR-NL_A5_V1.indb 16
07329_DE-EN-FR-NL_A5_V1.indb 16
25.05.2016 15:33:11
25.05.2016 15:33:11
