15
EN
■
Make sure that the mains cable is not squashed, bent or laid over sharp edges and
does not come into contact with hot surfaces.
■
Do not use any other accessories.
■
Do not operate the device without water in it or with less water than is required to
reach the
Min
marking. If this does happen, the device switches off automatically. In
this case, allow the device to cool down before you pour in cold water and switch on
the device.
■
Maintain a suf
fi
cient distance from heat sources such as hobs or ovens in order not
to damage the device. Do not place any naked
fl
ames, e.g. burning candles, in the
immediate vicinity of the device, cable or plug.
■
Do not drop the device or allow it to be knocked violently.
■
Do not pull or carry the base station by the cable.
■
Do not expose the device to extreme temperatures, wide temperature variations,
moisture, wet conditions or direct sunlight.
■
Do not use any caustic or abrasive cleaning agents to clean the device. These can
damage the surface.
Notes on Hygiene
■
There may still be some production residues on the device. To avoid harmful effects
to your health, clean the device before you
fi
rst use it (see the "Cleaning and Care"
chapter).
■
Only use fresh (potable) drinking water that is cold to medium-warm for boiling water.
Do not use any water that comes from a bath, wash basin or other containers.
■
Keep the device clean.
Items Supplied and Device Overview
1
Lid
2
Control panel with control lamps
3
Handle
4
Base station (incl. cable winder)
5
LED-lighting with change of col-
our depending on temperature
set:
60°C green
70°C blue
80°C yellow
90°C purple
100 °C
red
6
Kettle
7
Water level indicator with
MIN
and
MAX
marking
8
Pouring spout (with limescale
fi
lter)
9
Button for opening the lid
1
2
8
3
9
4
5
7
6
