GoVideo 525p, User Manual

8

Connections

������

OR

����������

TV Connections

Battery Connections

Charging the Battery

•  Attach the supplied battery pack to the back of the portable DVD player.

•  Plug the supplied AC adapter into a standard power outlet, and then connect it to the DC IN 12V jack on 

the left side of the player.

•  Turn off the player. The battery pack will NOT charge while the portable DVD player is powered on.

•  The red “Batt Chrg.” light will glow while the battery pack is charging and will turn green when fully 

charged. Allow several hours to charge the battery pack.

•  When fully charged the battery will last ~2.5 hours.

Removing the Battery

•  Press the PUSH button to remove the battery pack.

Standard AV Connections

•  Connect the supplied audio/video 

cable (mini-plug to RCA) from the AV 

OUT jack to the Audio/Video Inputs on 

our television.

•  Slide the AV OUT/AV IN switch to the 

AV OUT position.

CAUTION

•  Use specifi ed charger only.

•  May explode if battery is incorrectly replaced or disposed of in fi re.

•  Do not short circuit.

•  Danger of explosion if battery is incorrectly replaced. Replace only with the 

same or equivalent type.

•  Do not place the battery pack under direct sunlight or in excessively hot places 

(over 60°C (140°F)) such as the dashboard of cars.

•  Only use with the specifi c power adapter by manufacturer.

•  The battery pack will not charge while the DVD player is turned on.

S-Video/Progressive Scan Connections

For improved picture quality:

•  Connect an S-Video cable with mini-plug 

adapter (not included) from the S-VIDEO/

P-SCAN jack to the S-Video input on your 

television.

  or

•  Connect a Component Video cable with 

mini-plug adapter (not included) from the 

S-VIDEO/P-SCAN jack to the Component 

Video input on your television.

•  Slide the AV OUT/AV IN switch to the AV 

OUT position.

•  Press the MODE button to switch between 

S-Video and Progressive Scan modes.