GoVideo Sonic Blue DVR4250, User Manual

PREP

ARA

TION

13

Connections (Continued)

Basic TV Connections 

Make one of the following connections, depending on
the capabilities of your existing equipment.

Due to Macrovision encoding, you may not be able to
view DVDs when connecting the DVD+VCR to a
TV/VCR combination unit.

RF coaxial connection

Connect the RF OUT jack on the DVD+VCR to the
antenna in jack on the TV using the supplied 75-ohm
Coaxial Cable 

(R)

.

Note

If you use this connection, tune the TV to the
DVD+VCR’s RF output channel (CH 3 or 4). The default
setting is channel 3.

How to set the DVD+VCR’s RF output channel 

When the DVD+VCR is turned off, press and hold CH (

v

or 

V

) on the front panel for about five seconds to toggle

the RF output channel between CH 03 and CH 04. The
“RF 03” or “RF 04” is displayed on the display window.

Audio/Video connection 

11

Connect the DVD/VHS VIDEO OUT jack on the
DVD+VCR to the video in jack on the TV using the
supplied video cable 

(V)

.

22

Connect the Left and Right DVD/VHS AUDIO OUT
jacks on the DVD+VCR to the audio left/right in
jacks on the TV 

(A1)

using the supplied audio

cables.

Note

If you use this connection, set the TV’s source selec-
tor to VIDEO.

Optional TV Connections 

Notes

You can ONLY watch and listen to DVD playback
through one of the following connections.

For using S-VIDEO OUT or COMPONENT VIDEO
OUT jack, set the TV Output Select mode on the
SETUP menu to corresponding mode. See page 19.

Audio/Video connection 

11

Connect the VIDEO OUT jack on the DVD+VCR to
the video in jack on the TV using the video cable
supplied 

(V)

.

22

Connect the Left and Right AUDIO OUT jacks of
the DVD+VCR to the audio left/right in jacks on the
TV using the supplied audio cables 

(A2)

.

S-Video connection 

11

Connect the S-VIDEO OUT jack on the DVD+VCR
to the S-Video in jack on the TV using the optional
S-Video cable 

(S)

.

22

Connect the Left and Right AUDIO OUT jacks of
the DVD+VCR to the audio left/right in jacks on the
TV using the supplied audio cables 

(A2)

.

Component Video (Color Stream

®

) connection

11

Connect the COMPONENT VIDEO OUT jacks on
the DVD+VCR to the corresponding in jacks on the
TV using an optional Y Pb Pr cable 

(C)

.

22

Connect the Left and Right AUDIO OUT jacks of
the DVD+VCR to the audio left/right in jacks on the
TV using the supplied audio cables 

(A2)

.

L

R

AUDIO INPUT

VIDEO 

INPUT

ANTENNA

INPUT

Rear of TV

Rear of DVD+VCR

A1

V

R

L

R

Y

Pb

Pr

COMPONENT VIDEO INPUT

AUDIO INPUT

L

VIDEO 

INPUT

S-VIDEO 

INPUT

Rear of TV

Rear of DVD+VCR

S

A2

V

C