E. Charging:
Connect glasses to computer by USB cable to
charge battery. The red light will flash during the charging
process.Glasses are fully charged when the red light is
illuminated solid red and no longer flashing. It will take up to 3
hours to obtain a full charge, A high capacity lithium polymer
battery powers GoVision. Since the battery is brand new, it’s
best to wear out the battery entirely before recharging. Please
make sure your GoVision's are full charged before first use.
F.Trouble shooting:
a
.
Insufficient MicroSD card Storage space:
red light will
illuminate solid for 10 seconds and turn off. If this happens,
please move the files off the SD card and store the files into a
remote hard drive or on your computer to free up the SD card
storage.
b.
Low battery:
When glasses are not fully charged, the red
light indicator will flicker and turn off within 3 mintues. Please
make sure your glasses are fully charged before using.
No function:
Please make sure the SD card is properly
secured in the SD card slot.
If the glasses stop working for any reason or are not
responding, please insert a small paper clip end into the reset
button to restart device. If additional problems persist, please
contact us or email us at:
c
.
phone: 617.379.0023.
