5 Interface Configuration
IPUG781-1.5.1E
11(12)
5
Interface Configuration
Selecting "Tools > IP Core Generator" in Gowin Software, you call and
configure USB 2.0 SoftPHY.
1. Open IP Core Generator
After creating the project, you can click the "Tools" tab in the upper left,
select and open the IP Core Generator via the drop-down list, as shown in
Figure 5-1.
Figure 5-1 IP Core Generator
2. Open USB 2.0 SoftPHY IP Core
Select "Soft IP Core > Interface and Interconnect > USB 2.0 IP", as
shown in Figure 5-2. Double-click to open the configuration interface.