3
(Numbers refer to Figure A)
Key Switch (#1)
The main key switch is located on side of tiller column The
key switch has two positions: OFF: The R8-S cannot be
driven and the EMB is locked.
ON: Power is supplied to the R8-S and the EMB is released
automatically when the throttle control lever is squeezed.
To operate the R8-S, insert the key in the key switch and
turn it to
ON (clockwise). The switch will remain in this position and
the Power indicator will be lit.
Note: The key switch is used to operate the R8-S, not for
locking.
Handlebar
adjustment lever
(#2)
Adjust the position of the handlebars (height and distance)
as follows:
1. Push the handle bar adjustment lever (which locks the
handlebars in place), and move the handlebars to the
position you want.
2. Release the lever to lock the handle bars in place.
Charging Socket
(#3)
Before attempting to drive the R8-S, make sure the plug is
disconnected from the charging socket.
Note: While the plug is in the charging socket, the R8-S
cannot be operated.
Insert the charger plug in the charging socket located on
the right side of the tiller column to charge your scooter.
