- 10 -
7. COMPUTER OPERATION INSTRUCTIONS
I.
Start Display:
1.
If the SAFETY KEY is taken off, the matrix window will display arrow adown. If the SAFETY KEY
is replaced
，
the matrix window will display KGS (mile) for avoirdupois unit. Weight window glitters
and displays the value set in advance. The value is 70KGS(150LBS) and range
23~180KG(50~400LBS). At this time Weight window displays , light is on. Finish setting or not
setting, press ENTER and the window will turn to display Start / Ready status. The matrix window
displays pulsatile heart-shaped picture. The aim of setting weight is to make a change of burning
CALORIES. This can be only done after starting. It does not need to set in PROGRAM. It means you
can use the value after starting. You must set newly after starting again.
2.
When the SAFETY KEY is removed, the beeper will sound and then the treadmill will stop running.
At this time place the SAFETY KEY back and all the values will go back to the initial position.
3.
Under the common Start / Ready status, if you don’t handle the heartbeat sensor, PULSE window
will display HP picture. When you handle it, you will see PULSE window start to display heartbeat
value.
II.
Operation Instruction：
1.
Under Start/Ready position, you can press Mode directly to enter the program edit.
2.
Under Start/Ready position, press Start to enter directly by pressing Manu run.
3.
If the machine has fan function, you can press
to start or stop fan. Pressing once
means starting and pressing twice means stopping.
III.
Operation Instruction：
1.
Under Start/Ready position, you can press Mode directly to enter the program edit.
2.
Under Start/Ready position, press Start to enter directly by pressing Manu run.
3.
If the machine has fan function, you can press
to start or stop fan. Pressing once
means starting and pressing twice means stopping.
Summary of Contents for TREADMILL 304
Page 1: ...TREADMILL 304 OWNER S MANUAL...
Page 21: ...20...
