SPECTRA
TM
TI 35 User Manual
SPECTRA
TM
TI 35 User Manual
16
17
Before You Start
Remove batteries from the device before connecting to your PC, or
it may cause device damage.
Steps
1. Lift the cable interface cover.
2. Connect the device and power adapter with a type-C cable to
power on the device. Alternatively, connect the device and PC to
export files.
Insert the batteries into the battery compartment.
Before You Start
The device supports 3.0 V or 3.7 V rechargeable lithium battery or
3.0 V non-rechargeable dry battery.
2. Make sure the battery‘s
positive terminal and
negative terminal are
installed correctly.
Steps
1. Rotate the hand screw
counterclockwise to
loosen it.
2.1 Connect Device
2.2 Install Battery
Chapter 2 - Preparation
Negative
Positive
Loosen
3. Rotate the hand screw
clockwise to tighten it.
Take the battery away if
the device is not used
for a long time.
USB-C