www.gpsinsight.com
|
866.GPS.4321
|
support@gpsinsight.com
Page 14
Reconnecting the Antenna Wires
• If the antenna becomes disconnected from the unit during installation, make sure
to reconnect the antenna wires to the device. Each antenna wire should be plugged
into the appropriate jack labeled on the end of the unit.
• Although the antennas may appear similar, please note that the cellular antenna is
encased in a maroon end cap and the GPS antenna is encased in blue.
• Each antenna wire should easily snap into the appropriate jack. No solder or excessive
force is necessary. Note that the cellular antenna connector should be snapped in at
a 90˚ angle.
GPS Antenna Wire (blue) Cellular Antenna Wire (maroon)
GPS Antenna
Port
Front of Unit