www.gpsinsight.com
|
866.GPS.4321
|
support@gpsinsight.com
Page 16
Creating Tamper Evidence
1. For the Cellular Antenna, slide the end of the yellow zip tie into the cut-away section
on the back left side of the device. If the antenna is plugged in correctly (at a 90° angle)
the zip tie should slide through the top of the cellular antenna plastic cap. Lock the zip
tie and cut the excess plastic to prevent the antenna cable from being unplugged.
2. For the GPS antenna, slide the end of the yellow zip tie into the cutaway section of
the top right side of the device. If the antenna is plugged in correctly, the zip tie should
slide through the top of the GPS antenna plastic cap. The zip tie should now be looped
through the plastic end cap of the device, as well as the plastic cap of the antenna cable.
Lock the zip tie and cut the excess plastic to prevent the antenna cable from being
unplugged.
Installation Tip:
For easier threading of the zip tie through the plastic cap of each antenna, bend the
end to curve it upward.
Cellular Antenna Port
GPS Antenna Port