TK510 GPS Vehicle Tracker User Manual
Page
13
III. The Setting for GPRS Connection
The GPRS setting is necessary for using the following 2 functions:
(1) Check the car
‟s real physical address by send 111111ADD
(2) Online tracking service by web-based tracking platform
SMS format:
111111WWW:IPN:X;COM:X;APN:apn,user,password;RPT:X;SLP:X;RUN:X;
IDN: The tracker
‟s ID, it is the last 14 digits of IMEI which can't be
changed.
IPN: The IP address or domain name of the GPRS server
COM: The communication port for the GPRS server
APN: The Access Point Name for the GSM SIM card.
RPT: The interval for the uploading GPRS packet (Unit: sec.)
SLP: The interval for uploading GPRS packet when car is parked
(Engine is OFF and no vibration). (unit: sec.);
RUN: GPRS connection setting. 0=close, 1=TCP, 2=UDP.
IDN: The tracker
‟s ID, it is the last 14 digits of IMEI which can't be
changed.
Example, if server is: www.51track.com, TCP port is 8500, APN is
web.gprs,mtnnigeria.net, apn user:web, apn password: web, time interval is 60
seconds, Then the command is:
111111WWW:IPN:www.51track.com;COM:8500;APN:web.gprs.mtnnigeria.net,
web,web;RPT:60;RUN:1;
User can send one or more options at the same SMS commands, such as:
111111WWW:IPN:X;COM:X;
This is to set the server
‟s address and port separately.
Example: 111111WWW:IPN:www.51track.com;COM:8500;
111111WWW:APN:X;
This is to set the APN (access point name). Please use
“,” to separate the
APN, APN username & APN password.
Example: 111111WWW
：
APN
：
web.gprs.mtnnigeria.net,web,web
；
