TK510 GPS Vehicle Tracker User Manual
Page
17
Activate/Deactivate RFID Function
The following SMS commands are used to turn ON/ OFF the RFID function:
111111RFD:6:1
: Activate the RFID function (Default setting)
111111RFD:6:0
: Deactivate the RFID function
Arm/Disarm by RFID Tag
The following SMS command is used to turn ON/ OFF the RFID's
arm/disarm function:
111111RFD:8:1
: Activate the RFID's arm/disarm function (Default setting)
111111RFD:8:0
: Deactivate the RFID's arm/disarm function
Once this function is activated, only the authorized tags can be used to
arm/disarm the system.
Define the 2 types of RFID readers & tags
The tracker supports 2.4G long distance RFID tag & regular Mifare1 IC card.
It needs different RFID reader or reader's module.
111111RFD:1X,5:Y,7:Z,
X=0: reader in USB port; X=1: reader's module inside;
Y=0: reading data send once; Y=1: reading data send twice;
Z=0: Mifare1 IC card; Z=1: 2.4G long-distance tag;
Autorize the RFID Tags to Arm/Disarm
The SMS command is used to authorize maximum 20 RFID tags:
111111TAG:XX:YYYYYY,
(with , at the end)
XX: 01 ~20 , it is the sequence of the authorized RFID tag
YYYYYY: it is the ID no. of the RFID tag (6 digits, pasted on sticker of tag)
Example: The following command is to authorize the tag #234601 &
tag#234602 to arm/disarm.
111111TAG:01:234601,02:234602,
To remove the 2nd stored tag: 111111tag:02:000000, (with , at the end)
To check the 00-10 stored tag: 111111tag: (with : at the end)
To check the 11-20 stored tag: 111111tag:11
