background image

 

 

11

response information or ‘&770&PASSWORD ER&&’ if the password is wrong.   

 

 Send command to the terminal.       

 The terminal return confirmation message to the mobile phone. 

9. Set User name Command   

SMS Command Format: #801#4~20-digit letters or numbers #4-digit password ## 

Example: #801#13900139000#0000## 

Notes:  After  executing  this  command,  the  user  name  of  the  terminal  on  GPRS  mode  is  required  to  be  set  up 

according  to  actual  demand.  After  the  setup  is  successful,  the  terminal  will  send  reply  with  ‘&801&successful 

setting&&’ or ‘&801&PASSWORD ER&&’ if the password is wrong. 

10. Set APN Command   

Create the SMS “802#APN letters or digits, 4-20 bits # Log user name letters or digits 4-20 bits in # Log password 

letter or digits 4-20 bits in # terminal password 4 bits ##” and send it to the terminal; after executing this command, 

the terminal will automatically restart and connect to GPRS with APN set. 

Command example 1: #802#cmnet###0000## 

Command example 2: #802#CCDLEN#QIUXIA.21#RX0000#0000## 

After this command is executed, APN will be CCDLEN; the login user name is QIUXIA.21 and login password is 

RX0000.   

Note: The default APN of this product is CMNET. 

11. Setup of Server Address   

Command Format: #803# Fixed IP address# port number#4-digit password## 

This command is used to set GPRS center server address, which could be fixed IP number, like IP1, IP2, IP3, 

IP4……as well as domain name with the length less than 64. After the setup is successful, the module will send 

a reply with ‘&803&successful setting&&’ or ‘&803&PASSWORD ER&&’ if the password is wrong. 

Example: #803#222.73.173.204#7003#0000## 

Summary of Contents for TV680















Reviews: