Seite 10
GPS
vision.de
M
anual /
B
edienungsanleitung TK5000 - Version 2.0 -
GPS
Vision.de - Incutex Germany GmbH
Bedienungsanleitung TK5000
Manual
6.4 Command syntax
The commands will always have the same structure:
WP + $ command = password, parameter, parameter, parameter...
Example:
$WP+
TRACK
=
0000
,
1,60,0,0,1,1,15
"$WP+"
is the sign and thus the basis for each command.
"TRACK"
is the command. A list of all commands, see Section 2.3
"0000"
is the password. This you can use a GPS tool, or via SMS.
"1,60,0,0,1,1,15"
are the parameters that are necessary for the particular command.
A complete command consists of these four parts. For details about the parameters of the com
-
mands, see the Protocoll description or the GPS tool.
When you send a command to the tracker, the tracker will always confirm the command, so you
know whether the transfer has worked, and the new command will be followed.
These confirmations will always receive the fixed SMS central number. (See GPS-Tool)
Example:
You send
$WP+TRACK=0000,1,60,0,0,1,1,15
via SMS to the tracker.
Answer choice 1:
$OK:
TRACK=0000,1,60,0,0,1,1,15
The order was confirmed with "OK". This means that the command was accepted.
Answer choice 2:
$ERR:
TRACK=
2
The "ERR" in the response is a mistake. More details will give us the number "2". The number can be
looked up in the error code list (see 6.6). In the example, the number stands for "incorrect command
parameters". Check if the command you have sent is correct.
6.5 Response of the tracker
