How to Use the
GPS Mileage Tracker
to Upload Your Trip Information
Connect the GPS logging device to your computer.
Plug the DG Data Logger into a USB port on your computer, and press the power button
for three seconds until the power light on the device turns red.
Start the gpsMileageTracker program.
Before loading data, be sure to specify your online name and password on the
Configuration screen. The following explains the information you should enter on the
Configuration form before uploading data.
Configuration form
Preferences tab
Account Login
User name:
Password:
Time zone
Change to your local time zone
Trip default
Trip ends if stopped for longer
than X minutes. The system will
read your data and set the end
point of one trip and the start of
the next trip if you stop for a
longer time than entered here.
Connection
The system should detect the port
the Data Logger is attached to.
Click the Save button when you are finished making changes. Click the Red X to close
the form and return to the main screen.
