26
►
Close the valves by pushing and twist
the green button clock- or anti clockwise
by a quarter turn. If valve is closed, the
green button stands out.
►
Insert the bayonet nozzle adapter of tube
of the inflation appliance (bellow pump,
electric- or other air pump), into the so-
cket of the airvalve and twist the bayonet
nozzle clockwise.
►
Inflate the float tubes to full operation
pressure (0.3 bar)
►
Cover the valve with the valve cap (ba-
yonet cap).
See „Valve - Inflation“ in the Operating Inst-
ructions - Part 2.
Only for
EVO
►
Lift the bowsprit and bind it to the cross-
bar by means of the strap.
►
Wind the strap around twice and affix
and fasten it by means of the jam buckle.
►
Connect the up - and downhaul with the
carabiners (red line - red stopper knob,
greenline - green stopper knob).
►
When lifting the blade pull the left hand
line and lock it in place into the black jam
cleat.
►
When lowering the centerboard blade,
pull the right hand line and lock it in place
into the silver colour automatic jam cleat
(same function as the cleat on the rudder
head).
NOTICE: The belt does not have to be
extremely tensioned. It should only hold
both parts until the jib furler is set.
INflATE flOAT TUBES
Summary of Contents for HAPPY CAT LIGHT
Page 20: ...20 ...