61
19X Service Manual
Timing the Machine
1. Remove the bobbin case from the hook
assembly.
Parts & Tools Needed:
Instructions
Timing your machine aligns the needle and hook assembly so that they are in the correct places
during the creation of a stitch. Improper timing can result in damage to the machine and needle, or
make sewing impossible. Please consult with a Grace Company support technician before attempting
to adjust the timing on your machine.
Timing Spacer Tool
2 mm
T-handle Allen
Wrench 2 mm
4. Look into the machine’s
timing cut-out
and
turn the hand wheel. The
hook assembly
will rotate.
1.
Turn off the machine.
2. Check that your
needle
is not bent or
damaged, and that it is inserted all the way
into the needle bar (see page 6).
1
2
3
3. Remove the needle plate (see page 59).
Flat-head Screwdriver
4
Needle Bar
Sight Hole
Needle
Timing
Cut-out
Hook
Assembly
5
