10
Mondo+ User Guide
Installation
The easiest way to connect to a wireless network is to have the Mondo+ scan for wireless
networks, and then choose your wireless network from the list of wireless networks. The
Mondo+ will automatically display the strongest Wi-Fi network at the top of the list.
However, if your wireless network name (SSID) is hidden, or if your network is DHCP disabled,
you’ll have to manually enter the network settings. Refer to “Manually Connecting to a
Wireless Network” on page 11.
Turning the
Tune Knob
scrolls through menus and lists to highlight items, and pressing the
Tune Knob
selects a highlighted item.
Easy Connection to a Wireless Network
1.
Plug the AC Power Adapter into an AC outlet, and plug the power plug into the
connector on the rear of the Mondo+. Press the
Power Button
if the Mondo+ does not
automatically turn on.
2.
If the Mondo+ has not previously connected to a wireless network, the Mondo+ will
display the Network Wizard screen, with Wireless highlighted. Press the
Tune Knob
.
Otherwise, press the
Home Button
, turn the
Tune Knob
to highlight Setup and press the
Tune Knob
to select. Turn the
Tune Knob
to highlight Network Wizard and press
Tune
Knob
to select. Wireless will be highlighted; press
Tune Knob
to select.
3.
At the Wireless screen, Scan will be highlighted. Press
the
Tune Knob
to select.
4.
Wait while the Mondo+ scans for wireless networks
and then select your wireless network from the list.
Turn the
Tune Knob
to highlight your wireless network
and then press the
Tune Knob
to select.
5.
The Mondo+ will attempt to connect to the wireless
network. If you chose a network that requires a
password, you will be prompted to enter the network
password. Password will be highlighted. Press
the
Tune Knob
to begin entering the password.
Otherwise, the Mondo+ will attempt to connect to the
wireless network.
6.
To enter the network password, turn the
Tune Knob
to highlight each character of the password and press
the
Tune Knob
to select the character. Then enter the
next character and continue until you have finished
entering the password. If you make an error, press the
Delete Button
to erase the character. When you have
completed entering the network password, press the
Enter Button
.
7.
When the Mondo+ has successfully connected to
the wireless network, “Connected successfully”
will be displayed.
Wireless
Scan
Manual
Scan
Your Wireless Network
Some Other Wireless Network
Some Other Wireless Network
B
a
A
_
Your Wireless Network
Password
Cancel
Move Left
Move Right
Enter
Delete
Connect to a Wireless Network
