51
APPENDIX
Using the USB Port as a USB-Ethernet Connection
Your radio is equipped with 801.11n Wi-Fi card for a wireless connection to your wireless
router that is connected to your internet service. Your radio may also connect using the
USB port with the use of the Grace Digital
USB-Ethernet adaptor
(separate USB-Ethernet
adaptor purchase required) .
Once you have a Grace Digital
USB-Ethernet adapter
, remove the power from the radio
then insert into the USB port, plug the radio back into the power. After the radio boots up
please go to the main menu and
select ‘settings’ then ‘Network Config’ then a new menu
item will be displayed named
‘ Wired / wireless’. Select this menu and select ‘wired only’.
Your radio will now connect to your Ethernet connection.
IMPORTANT
If you boot up (power on) the radio without a
USB-Ethernet adaptor
connected to the
radio's USB socket, the radio will only recognize a USB thumb drive connected to the USB
socket. If a
USB-Ethernet adaptor
is connected to the radio after the unit is booted up, the
unit will NOT recognize the connection. To have the unit recognize the
USB-Ethernet
adaptor
connection, the unit must then be rebooted (powered off and powered back on)
while the adaptor connected to the USB port.
The radio will be able to access a USB thumb drive when the
USB-Ethernet adaptor
is
removed and when a thumb drive is connected to the USB socket.
©2014 Grace Digital Inc. San Diego, CA