11
Connect Your Tuner to Your Network
Getting Started
Step 1 - Power up the tuner
Power your tuner by connecting to the Power Adapter with the socket labelled 5V 1.2A DC at
the back of your TUNER. Turn the main power switch ON at the rear of the cabinet.
CAUTION:
Use only the power adapter supplied with this tuner. Connecting a power
adapter other than the power adapter supplied is hazardous and may
cause permanent damage to the unit, shock or fire.
NOTE: Your Tuner can be connected to the internet using a WIRELESS or a WIRED connection.
Once powered on, the display on the front of the tuner will light up and show:
Grace Digital Tuner
After a few seconds, the screen will change to show:
Initializing
Network
After a few seconds, the screen will change to show:
Scan for networks
Enter network
View Config
Edit Config