background image

4

recommended by the manufacturer.   
21. Heat-The product should be situated away from heat sources such as radiators, heat registers,
stoves or other products (including amplifiers) that produce heat.    

PRECAUTIONS  

1. In order to shut off the unit completely, unplug the power cord from the wall outlet, be sure to
unplug the unit if you do not intend to use it for a long period of time.    
2. Incorrect use of controls, adjustments and performance other than those specified herein may
result in hazardous radiation exposure.   
3. Should this product malfunction, discontinue use and contact a qualified service center.   

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION

RISKS OF ELECTRIC SHOCK- DO NOT OPEN!

To reduce the risk of electric shock, do not remove casing.

No user serviceable parts inside. Refer servicing to qualified service personnel.

The light flash with arrowhead symbol, within an equilateral triangle, is intended to

alert User to the presence of “dangerous voltage” which may be of sufficient

magnitude to cause electric shock to persons.

The

exclamation point inside an equilateral triangle is intended to alert

User to the

presence

of important operating and maintenance (servicing) instructions in the

literature

that may accompany the appliance.

This product may contain cheimcals listed in 

Proposition 65

(

http://www.oehha.ca.gov/prop65/prop65_list/Newlist.html

)

That may be known to cause cancer, birth defects or other reproductive harm

CAUTION:

 To prevent shock, match wide blade of plug to wide slot, fully inserted

BEFORE USE

1.

 

Choose a safe location and avoid placing the unit in direct sunlight or near any heat source.    

2.

 

Avoid locations subject to vibrations, excessive dust, cold or moisture.    

3.

 

Do not open the cabinet as this may result in electrical shock. If a foreign object is inserted
accidentally contact your dealer.

4.

 

When removing the power plug from the wall outlet, pull directly on the plug, NOT the cord.    

5.

 

Do not attempt to clean the unit with chemical solvents as this might damage the finishing. A
clean, dry cloth is recommended for cleaning.    

6.

 

In order to completely turn off the unit, unplug the power cord from the wall outlet.

7.

 

Keep this manual for future reference.   

TURNTABLE PARTS

1.

 

Dust Cover

2.

 

Platter

3.

 

45 rpm Adapter

4.

 

Tone Arm

5.

 

Lift Lever

6.

 

Speed Selection

7.

 

Auto Stop Control   

8.

 

Tone Arm Rest

9.

 

USB Jack

10.

 

RCA Output

Summary of Contents for GDI-VW00























Reviews: