16
Parts & Tools Needed:
Instructions
Installing the Wheel Covers
SBHCS Screw
M6 x 16 mm (x4)
Back Left Wheel
Base Cover
Back Right Wheel
Base Cover
Front Right Wheel
Base Cover
Front Left Wheel
Base Cover
T-handle Allen
Wrench 4 mm
4 mm
1. Locate the label on the inside of each wheel
cover.
1
2. Slide the covers onto the associated leg.
Back Right
Front Right
Back Left
Front Left
2
SBHCS Screw
M6 x 16 mm (x4)
3. Screw each cover into place using an SBHCS
M6 x 16 mm screw
and the 4 mm Allen
wrench. Tighten until snug.
3
Out-of-the-Box Assembly