65
4.
Place the two
needle plate screws
(shown
in gray) into the plate. Make sure the needle
plate is centered around the needle, and
then tighten the screws with the flat-head
screwdriver.
3. Slowly lower the needle with the hand
wheel. The needle should slide into the
center hole of the needle plate without
contacting the plate.
Installation Instructions
To install the needle plate onto the quilting machine, take the following steps:
1.
Power off the machine. Raise the needle to
the highest position using the
hand wheel
.
Needle Plate
Reinstalling the Needle Plate (Continued)
2. Align the screw holes on the needle plate
with those on the machine.
1
4
2
3
Hand
Wheel
Maintaining the Machine