18
5. Plug the cables from the handlebars into the
machine so the green stickers face up.
5
6.
Open the
handlebar levers (shown in
blue).
6
7. Twist the controls until they are comfortable
to hold and operate.
7
Tip:
For micro-stippling, angle the
handlebars down toward the needle plate in
step 4, and leave the controls horizontal in
step 7.
4.
Hold the handlebars at the desired angle
and tighten the cover screw.
4
InstallingInstalling the Handlebars (Continued)
Out-of-the-Box Assembly
8. Close the handlebar levers.
8
