Grace SR2+, Assembly Instructions Manual

pg. 5

Step 1: Leg Assembly

Parts Needed:

        -Frame Leg (3)

        -Table Support (4)

        -Table Angle Support (4)

        -M6 x 16mm SBHCS (8)

        -M6 x 10mm Connector Bolt (8)

1-1: Set up the Frame Leg on the left side. 

Place Table Support on top of the curved tube 

of the leg.  Line up the holes on the table 

support with the right row of holes on the 

leg.  Screw a M6 x 10mm Connector 

Bolt into each hole, as shown in Fig. 1

1-2: Place a Table Support on 

top of the back side of the Frame Leg.  

Line up the holes the same way 

as the previous table support. Screw 

a M6 x 10mm Connector Bolt into 

each hole, as shown in Fig. 1

1-3: Place a Frame Leg at the

 end of the table supports, 

making sure the curved tube is facing the same 

direction as the left side Frame Leg.  Line up the left row 

of holes with the table supports and screw in the M6 x 16mm 

SBHCS, as shown in Fig.1. Make sure the legs line up well, and the table supports are parallel. 

Note: For assembling the crib size frame, please line up the screw holes on table supports with the left 

row of holes on the middle leg, and lock them with M6x10mm Connector Bolts, as shown in Fig. 1-1.

1-4: On the front side of the frame, place a Table Support on to the top of the middle Frame Leg, line up 

the holes on the table support with the other row of holes on the leg.  Screw an M6 x 10mm Connector 

Bolt into each hole, as shown in Fig. 1.

1-5: Place a Table Support on to the top of the back side of 

the Middle Frame Leg.  Line up the holes and screw a 

M6 x 10mm Connector Bolt into each hole, as shown in Fig.1.

1-6:

 Place the right Frame Leg at the end of the unfixed table 

supports, oriented the the same direction as the left and 

middle Frame Legs.  Line up the right row of holes on the leg 

with the holes on the table supports, Screw a M6 x 10mm 

Connector Bolt into each hole, as shown in Fig.1. 

Frame 

Front

Frame Back

(2) M6 x 10mm 

Connector Bolt

(2) M6 x 16mm 

SBHCS

Frame Leg

Frame Leg

Table Support 1

Fig.1

Fig.1-1