Grace Victoria ITC-50MP3, Owner'S Manual

RECORDING to USB Drive / SD Card

Encode and Store from a normal CD

You can encode your favorite CD songs into MP3 format and store then into your memory 

device through the USB port or SD/MMC card slot.
1. Set the Function Selector (21) on the unit to choose the CD mode
2. Press the SKIP +/- button (14, 15) to select the track ,then press the PLAY/PAUSE button 

(17) to be encoded. 

3. Press the RECORD button (19) to start sync encoding and the display will show  “USB 

or CARD” flash ,

4. Press the SKIP + button (14) to select recording to USB port (25) or SD Card slot (26).
5. Press the RECORD button (19) or STOP/CD/USB/SD button (16) to stop encoding.
NOTE: Recording CD must be synchronized, it must be record the completed  song until 

the end. In case of interrupting or stop record during the middle of song playing, the song 

cannot be recorded. Therefore, if the recording is interrupted, it must be re-recorded from 

the beginning. 

Encode and Store from Turntable (PHONO)

You can encode songs from your favorite records into MP3 format and store then into your 

memory device through the USB port or SD/MMC card slot.
1. Set the Function Selector (21) on the PHONO position
2. Select the track number to be encoded.
3. Press the Record button to start sync encoding and the display will show  “USB or 

CARD” flash. 

4. Press the SKIP +/- button (14, 15)) to select recording into USB or Card drive.
5. Press the RECORD button (19) or STOP/CD/USB/SD button (16) to stop encoding

Copy from MP3 disc

You can copy the files from MP3 disc and store then into your memory device through the 

USB port or SD/MMC card slot.
1. Insert the MP3 disc and press the function button to  the CD.
2. Press the SKIP +/- button (14,15) to select the track ,then press the play/pause button (17) 

that you want  to copy.

3. Press the recording button to start copy the files and the display will show “REC”  “USB/

CARD” flash.

4.  Press the SKIP +/- button (14,15) to select USB or SD/MMC card drive.
5. Press the RECORD button (19) or STOP/CD/USB/SD button (16) to stop encoding.