Common Procedures
8
3A2853C
Common Procedures
Trigger Lock
Prime/Spray Valve
Follow the
Pressure Relief Procedure
whenever you see this symbol.
Pressure Relief Procedure
1.
Engage trigger lock.
2.
Put prime/spray valve UP to release pressure.
Always engage the trigger lock when you stop spraying
to prevent the sprayer from being triggered accidentally
by hand, or if dropped or bumped.
Trigger Locked
Trigger Unlocked
ti14995a
(red ring is visible)
ti18874a
ti18866a
UP position
(For priming and releasing
DOWN position
(Ready to spray)
ti14999a
pump pressure)
ti16700a
ti16701a
Do not operate or spray near children. Do not aim the
sprayer at, or spray any person or animal. Keep hands
and other body parts away from the discharge. For
example, do not try to stop the paint flow with any part
of the body.
This sprayer builds up an internal pressure of 2000 psi
(14 MPa, 138 bar) during use. Remove battery and fol
low this
Pressure Relief Procedure
whenever you
stop spraying and before cleaning, checking, servicing,
or transporting equipment to prevent serious injury.
ti14994a
ti18866a
ti14999a
ti16700a
Summary of Contents for 16N664
Page 33: ...Notes 3A2853C 33 Notes...
