32 308746
Technical Data
Power Requirements
230 VAC, 50 Hz,
. . . . . . . . . . . . . . . . . . . .
1 phase, 6A minimum
Working Pressure Range
0–207 bar
(20.7 MPa, 3000 psi)
. . .
Motor
1/2 hp
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cycles/liter
164
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery
0.33 gpm (1.25 lpm)
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Cord
1.0 mm
2
, 3 wire, 3.0 m
. . . . . . . . . . . . . . . . . . . . . . .
Inlet Paint Strainer
1525 micron
. . . . . . . . . . . . . . . . . . . . . . . . .
Stainless Steel Screen, reusable
Pump Inlet Size
1/2 npt(f)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Outlet Size
1/4 npsm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound Data:
Sound Pressure Level
79 dB(A)*
. . . . . . . . . . . . . . . . . . . . . . .
Sound Power Level
88 dB(A)*
. . . . . . . . . . . . . . . . . . . . . . . . .
* Measured while spraying with a .017 tip. Tested at 1 m per
ISO 3744.
Wetted Parts:
Displacement Pump
Stainless steel, Carbon steel,
. . . . . . .
, Aluminum, Polyethylene, Delrin
, Leather
NOTE:
and Delrin are trademarks of the DuPont Company.
Dimensions
Weight (dry w/o packaging) 16.6 kg
Height
483 mm
Length
381 mm
Width
356 mm
Graco Warranty
Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the ex
ception of
any special extended or limited warranty published by Graco, Graco will, for a period of twelve months from the
date of sale, repair or
replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is instal
led,
operated and maintained in accordance with Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by
faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or
substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibi
lity of
Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture
,
installation, operation or maintenance or structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributo
r for
verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defecti
ve parts. The
equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose
any defect
in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and
transportation.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that
no other
remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or pr
operty, or any
other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) y
ears of the
date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE IN CONNECTION WITH ACCESSORIES, EQUIPMENT
, MATERIALS OR COMPONENTS SOLD BUT
NOT MANUFACTURED BY GRACO.
These items sold, but not manufactured by Graco (such as electric motors, gas engines,
switches, hose, etc.), are subject to the warranty
, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance
in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equi
pment
hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract,
breach of warranty, the negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedi
ngs
entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les partie
s
reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents,
avis et procédures
judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procédures concern
ées.
ADDITIONAL WARRANTY COVERAGE
Graco does provide extended warranty and wear warranty for products described in the “Graco Contractor Equipment W arranty
Program”.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Sales Offices:
Minneapolis, Detroit
Foreign Offices:
Belgium, Korea, Hong Kong, Japan
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
PRINTED IN U.S.A. 308746
March 1997, Revised June 1999
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
