Installation
332561D
3
Installation
1.
Perform
Pressure Relief Procedure
, page 2.
2.
Install extension clamp support bracket (9).
3.
Pull out existing gun arm support bracket.
4.
Slide extension clamp onto existing gun arm
support bracket.
5.
Install existing gun support bracket.
6.
Install extension support bracket (9) and tighten
the clamp.
7.
Install exposed cable through cable bracket slot.
8.
Insert plastic cable retainer into cable bracket hole.
9.
Install cable end onto trigger plate pin and install
clip.
10. Route cable around unit and up through cable holes
behind hose mount. Use tie straps (16) to secure
cable to unit.
ti21734a
ti21719a
ti21720a
ti21716a
ti21721a
ti18997a
ti18999a
ti18998a
ti21712a
