LL200 Compressor Installation
14
332230P
23. With the compressor secured to the coupler
mounting plate, slightly loosen the four mounting
screws (20). Install all four carriage bolts (9),
washers (10), and lock nuts (11), and torque to
150-160 in-lb (16.9-18 N•m). Re-tighten all four
mounting screws (20) to 23-27 ft-lb (31-37 N•m).
24. Install compressor guard using three screws (14),
lock washers (15), and flat washers (16). Torque to
130-150 in-lb (14.7-16.9 N•m).
25. Apply thread sealant paste to threads of tee fitting
(6). Install tee fitting with safety valve (7) into
compressor output. Use a 11/16 in. wrench and a
9/16 in. backup wrench to attach the braided hose
from the air tank to the compressor.
