LL200 Compressor Installation
332230P
9
LL200 Compressor Installation
Tools Needed:
2.5 mm Allen wrench, 4.0 mm Allen wrench,
1/4 in. Allen wrench, 7/16 in. wrench, 9/16 in. wrench, 11/16 in.
wrench, T-20 Torx bit, rubber mallet, Phillips screwdriver.
1. Turn engine OFF. Let engine cool prior to working
on it.
2. Disconnect spark plug on unit.
3. Perform
4. Using bolts (36) and lock nuts (22), install air tank
bracket (3).
5. With a 9/16 in. wrench, mount air tank (53) to
bracket with screws (21).
6. Use the T-20 star bit to remove fan grill from shroud.
Save screws for reattachment.
Replacing the compressor requires pulling on the
starting rope. To help prevent entanglement, pinching,
and potentially serious injury from an unexpected
start-up, disconnect the spark plug prior to compressor
replacement.