Setup
10
310820H
5
Check inlet strainer for clogs
and debris.
6
Fill throat packing nut with
TSL to prevent premature
packing wear.
Do this each time you spray.
7
Turn power OFF.
8
Plug power supply cord
into a properly grounded
electrical outlet.
9
Turn prime valve down.
10
Place siphon tube set in grounded metal pail pratially filled with flushing fluid. See Grounding,
page 9. Do steps 1- 6 of Startup, page 11, to flush out storage oil shipped in sprayer. Use water to
flush water-based paint or mineral spirits to flush oil-based paint and storage oil.
ti5301a
ti5735b
ti5316a
/.
/&&
ti2810a
TIA
ti5856a
Flush