4
307–452
Ordering Charts
The charts below provide a cross reference between
identification numbers stamped on the parts and the
Graco part number. Chart 1 shows the complete gun
assemblies available, grouped by basic gun type.
Chart 2 shows fluid nozzle/needle combinations. Chart
3 shows the air caps available.
The following is an example of how to use these
charts:
D
Your application calls for a
pressure feed gun.
Chart 1 shows this to be a
P700N basic gun.
D
Your application calls for a
pressure feed gun.
Chart 1 shows this to be a
P700N basic gun.
D
Using Chart 2, the flow rate required and fluid vis-
cosity call for an
03N fluid nozzle and needle
com-
bination.
D
By using Chart 3, you determine that the
0 air cap
is best for the application.
D
This makes your combination a
P700N–03N–0.
Chart 1 shows that the
Graco part number for this
combination is
217–752.
Chart 1: Gun Combinations Available
P700N: Pressure Feed Guns
Combinations:
Ordering
Part No.
Gun
Nozzle
See Chart 2
Air Cap
See Chart 3
217–750
P700N
0N
0
217–752
P700N
0N
03
S700N: Siphon Feed Guns
Combinations:
Ordering
Part No.
Gun
Nozzle
See Chart 2
Air Cap
See Chart 3
217–755
S700N
11N
11
217–756
S700N
21N
2
217–758
S700N
3N
3
Terms:
Light Fluid: 19 to 24 seconds (No. 2 Zahn cup). Auto, furniture, appliances, fine-finish metallics, top coats, lacquer,
enamel primers.
Medium Fluid: 22 to 41 seconds (No. 2 Zahn cup). Contact adhesive, latex, maintenance paints, textures, primers,
epoxies, vinyls, high flow – high viscosity.
Heavy Fluid: Mastics, block fillers, roof coating, sound deadeners, adhesive, textures.
