Operation
18
3A4442F
Clear Tip Clog
To avoid tip clogs:
•
When the gun is not in use for extended
periods of time, keep the tip “wet” and
perform
•
Keep tip clean and free of material.
•
Engage trigger completely when
spraying. Partial trigger engagement
increases the chances of tip clogs.
1.
Engage trigger lock. Rotate spray tip to
unclog position. Disengage trigger lock.
Trigger gun at waste area to clear clog.
UNCLOG
NOTE:
If spray tip is difficult to rotate when
turning to the unclog position perform,
, page 10, then
turn Prime/Spray valve to spray position and
repeat step 1.
2.
Engage trigger lock. Rotate spray tip
back to spray position. Disengage
trigger lock and continue spraying.
SPRAY
Useful Tip
When spraying, if the gun is not used for a
significant period of time be sure to clean the
sprayer, or keep the gun “wet” by placing in
water or wrapping with a wet cloth. This
reduces the potential of the material drying in
the gun causing pack-out of the gun.
To avoid serious injury from skin injection do not
put your hand in front of the spray tip when
installing or removing the spray tip and tip guard.
ti29247a
ti29248a
