50
1. Place booster seat firmly against the back of
a forward-facing vehicle seat equipped with a
lap/shoulder belt only.
2. Place child in booster seat with child’s back
flat against back of booster seat.
3. Position lap/shoulder belt through shoulder
belt guide
not underneath shoulder belt
guide
. Belt should pass over vehicle belt
guide
. Fasten buckle and pull up on the
shoulder belt to tighten.
4. If shoulder belt lies across child’s neck,
head or face, redirect belt over shoulder by
adjusting the head support setting,
See page
51, Adjusting Head Support in Booster Mode.
5. The vehicle belt should lie across the child’s
shoulders centered in the red zone
with the
guides even with or just above the shoulders.
17.0 Securing Child & Booster Seat in Vehicle
Use only the vehicle lap and shoulder belt system
when restraining the child in the booster seat.
Summary of Contents for ARGOS 70 ELITE
